1000W LED Stadium Light with Yoke Mount and Reflector - 147,000 Lumens - 200-480V - 2000W MH Equivalent - 5000K
Part Number:
SLD-S1-50K1000BSxH-BLC20SPY
Manufacturer Part Number:
$1,399.99
ea.
Was
Similar Products Available Today
Features
- NEMA 4x4, NEMA 5x5, or NEMA 6x6 for long-distance, small-angle projection
- Replaces 2000W MH fixtures with a 147 lm/W efficacy
- Included reflector reduces uplight
- Preinstalled yoke mount with 170° adjustment
Ask About This Product
Get instant AI-powered answers
Try asking:
Total Price:
Loading...
Most Popular Compatible Products
Overview
The 1,000W LED Stadium Light with Yoke Mount and Reflector is designed to deliver high-powered lighting for high-pole installations such as sports stadiums, shipyards, and airports. The stadium light has a NEMA 4x4 or NEMA 5x5 light distribution pattern for long-distance, small-angle projection- the distribution patterns vary by beam angle. The fixture is available in 20°, 30°, and 40° beam angles with secondary optics for precise light output. An included reflector reduces unnecessary uplighting and light pollution. The die-cast aluminum body and polycarbonate lenses make the light resistant to impact and corrosion. Integrated heat sinks provide thermal regulation to prolong the fixture’s lifetime. Mount the fixture using the pre-installed yoke mount or optional slipfitter mount (sold separately). An optional laser pointer is available for aiming the light.
NOTE: Due to the weight of this product, do not install on wooden poles or older poles.
NOTE: Due to the weight of this product, do not install on wooden poles or older poles.
Product Details:
- Die-cast aluminum housing; polycarbonate lens with secondary optics
- Steel reflector and yoke mount
- IP65 waterproof
- EPA: 3.6 ft²
- Surge Protection: L/N-PE is 10kV, L-N is 6kV
- DLC 5.1 Premium
- 200-480 VAC
Documents
SLD-S1 Specification Sheet 
SLD-S1-50K1000BS2H-BLC20SPY IES File Dimensional Drawings
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
This product has been certified by Underwriter Laboratories to their engineering and safety standards.
This product meets higher lumen and efficacy standards than are required for a normal DLC® classification. This classification also requires submission of a driver IN-SITU temperature measurement test (ISTMT) along with information regarding integral controls.
Ask About This Product
Get instant AI-powered answers
Try asking:
Products Mentioned
Press Enter to send, Shift+Enter for new line
Responses are AI-generated from product documentation. For confirmation or more information, contact Super Bright LEDs customer service.
Conversations are recorded for quality assurance. More information
Ask About This Product
Get instant AI-powered answers
Try asking:
Products Mentioned
Press Enter to send, Shift+Enter for new line
Responses are AI-generated from product documentation. For confirmation or more information, contact Super Bright LEDs customer service.
Conversations are recorded for quality assurance. More information
Ask About This Product
Get instant AI-powered answers
Try asking:
Specifications
| Ambient Operating Temperature | -40 to 45 °C (-40 to 113 °F) |
|---|---|
| Brand | Super Bright LEDs |
|
CCT
CCT
 |
5000K |
|
Certifications/Compliance
Certifications/Compliance
Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact and energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else that may be involved confidence that the product is safe and will work well in their application. The most common UL and ETL certifications relate to safety and installation, although they do also provide some sanitation-related certifications (using NSF standards). Another common certification body is the DLC, which specializes in certifying the performance of a light—mainly related to environmental impact and electrical efficiency. Learn more about different certification types here . |
Certified by UL, DLC Premium |
|
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
5.3 A @ 208 VAC, 2.3 A @ 480 VAC |
| Dimmable | Yes |
|
Dimming Type
Dimming Type
0-10V Dimming: This type of dimming control is the most popular and newest style for compatible dimmable power supplies. It works by varying the voltage from 0 to 10 VDC. A 10-volt signal on the dimming wire will allow maximum current flow to the LEDs for maximum intensity. A 0.6-volt signal on the dimming wires allows 6% of the current to flow from the power supply, dimming the LEDs to approximately 6% of full intensity. 1-10V Dimming: This type of dimming control is an older style that is being replaced with 0-10V dimming control. It works by varying the voltage from 1-10 VDC. A 10-volt signal on the dimming wire will allow maximum current flow to the LEDs for maximum intensity. A 1-volt signal on the dimming wire allows 10% of the current to flow from the power supply, which generates approximately 10% of the maximum intensity for the LEDs. TRIAC Dimming: TRIAC dimmers are typical household dimmers sold in hardware stores by brands like Lutron and Leviton. They rely on a semiconductor device called a TRIAC (Triode for Alternating Current). Adjusting the dimmer switch alters the timing at which the TRIAC conducts electricity in each AC cycle, modulating the energy delivered to the light bulb and resulting in adjustable brightness levels. Pulse-Width Modulation Dimming: This type of dimming control adjusts the output current based on the duty cycle. As the duty cycle increases, the current will increase, and the LEDs will be brighter. Conversely, if the duty cycle decreases, the current will decrease, and the LEDs will be dimmer. Resistive Dimming: Resistive dimming can be fixed or variable. If a fixed dimming level is required, a simple resistor is needed to dim the LEDs to a particular level. A potentiometer can serve this purpose if a varying dimmable level is desired. By changing the resistance value of the potentiometer, the output current of the power supply changes, and the LED intensity changes. Controlling a single power supply will require a 100K ohm potentiometer for 100% intensity (100K ohm) to approximately 10% intensity (10K ohm) based on the wiper position. |
0-10V |
| Efficacy | 147 lm/W |
|
Environmental Rating
Environmental Rating
 |
Suitable for Wet Locations, Waterproof |
|
EPA Rated
EPA Rated
The Effective Projected Area (EPA) refers to the strength of wind velocity a pole-mounted light fixture can withstand. EPA ratings are employed to assess whether lighting fixtures can adhere to the standards required by specific geographical regions. The Effective Projected Area is a measure used to determine the wind forces a lighting fixture might face.
For more information on calculating EPA and why it is important visit our blog 'What Is EPA and Why Do You Need To Know?' |
3.6 ft² |
| Equivalency | 2000 Watt Metal-Halide |
| Finish | Black |
| Input Connection Type | Pigtail |
| Integrated Surge Protection | 10 kV (L/N-PE), 6 kV (L-N) |
|
IP Rating
IP Rating
 |
IP65 |
| LED Color | Cool White |
| Rated Life (L70) | 50000 Hours |
| Lumens | 147000 Lumens |
| Mount Type | Yoke Bracket |
| Operating Voltage | 200-480 VAC |
| Wattage | 1000 Watts |
| Power Factor | ≥0.9 |
| Product Materials | Aluminum Housing, Polycarbonate Lens |
| Product Weight | 70.7 lb (32.1 kg) |
| UL File Number | E366643 |
| Warranty | 5 Year |
| Part NO | Beam Angle | BUG Rating |
Distribution Type
Distribution Type
|
|---|---|---|---|
| SLD-S1-50K1000BS2H-BLC20SPY | 20° | B5-U0-G5 | NEMA 4x4 |
| SLD-S1-50K1000BS3H-BLC20SPY | 30° | B5-U0-G5 | NEMA 4x4 |
| SLD-S1-50K1000BS4H-BLC20SPY | 40° | B5-U0-G3 | NEMA 5x5 |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Abusive and offensive language
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
Recently Viewed
Get a Quote for
Get 10%
off your order
And be the first to know about the new products, sales, and more.
By providing your phone number, you agree to receive marketing text messages about new
products,
sales, and more.
Consent is not a condition to purchase. Msg and data rates my apply.
Reply HELP for help and STOP to cancel. View our Terms
of
Service and Privacy Policy.
There was an error while subscribing your email address
Please try again later
This email address is already subscribed to our mailing list
Thank you for being a subscriber!
Thank you for signing up!
An email has been sent to
This email address previously signed up to receive emails.
Only first-time subscribers are eligible for % off their next order.
Loading...
Item Added
Part Number:
No accessories available for this product.
Loading...