Half Moon LED Wall Pack - Up/Down Light - Selectable Wattage and CCT - Up To 11,600 Lumens - Bypassable Photocell - 250W MH Equivalent - 48W / 64W / 80W - 3000K / 4000K / 5000K
Part Number:
WP6-SW3B80S-P
Manufacturer Part Number:
$189.99
ea.
Was
In Stock
Similar Products Available Today
Features
- Selectable wattage and CCT for various applications
- 0-10V dimmable
- IP65 waterproof, suitable for wet locations
- Integrated photocell for simple operation
- Type III light distribution for large area lighting
Ask About This Product
Get instant AI-powered answers
Try asking:
Most Popular Compatible Products
Overview
The Half Moon LED Wall Pack has architectural appeal and is highly customizable, with four field selection switches: wattage, CCT, photocell, and light control. Using the switches, select between 48, 64, or 80 watts, and 3000K, 4000K, or 5000K. Select between manual photocell operation or automatic dusk-to-dawn operation. Complete the customization by selecting downlight mode or downlight with an uplight accent. Its Type III light distribution is ideal for commercial buildings, residential complexes, and hospitality venues. The wall pack easily installs with the included safety cable, mounting bracket with an integrated level, rubber gasket, and hardware.
Product Details:
- Aluminum housing with clear glass lens
- Streamlined design for contemporary lighting
- Full cutoff downlight or downlight with uplight accent
- 120-277 VAC
- Certified by UL
- 5-year warranty
Documents
WP6 Wall Pack Specification Sheet Dimensional Drawings
Applications:
- Building Exteriors and Facades
- Commercial Buildings
- Commercial Lighting
- Perimeters
- Residential Complexes
- Resorts
- Retail Shops
- Uplighting
- Wall Sconces
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
This product has been certified by Underwriter Laboratories to their engineering and safety standards.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.
Ask About This Product
Get instant AI-powered answers
Try asking:
Products Mentioned
Press Enter to send, Shift+Enter for new line
Responses are AI-generated from product documentation. For confirmation or more information, contact Super Bright LEDs customer service.
Conversations are recorded for quality assurance. More information
Ask About This Product
Get instant AI-powered answers
Try asking:
Products Mentioned
Press Enter to send, Shift+Enter for new line
Responses are AI-generated from product documentation. For confirmation or more information, contact Super Bright LEDs customer service.
Conversations are recorded for quality assurance. More information
Ask About This Product
Get instant AI-powered answers
Try asking:
Specifications
| Ambient Operating Temperature | -40 to 45 °C (-40 to 113 °F) |
|---|---|
| Beam Angle | 160° x 100° |
| Brand | Super Bright LEDs |
|
CCT
CCT
 |
3000K, 4000K, 5000K, Selectable CCT |
|
Certifications/Compliance
Certifications/Compliance
Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact and energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else that may be involved confidence that the product is safe and will work well in their application. The most common UL and ETL certifications relate to safety and installation, although they do also provide some sanitation-related certifications (using NSF standards). Another common certification body is the DLC, which specializes in certifying the performance of a light—mainly related to environmental impact and electrical efficiency. Learn more about different certification types here . |
Certified by UL, FCC |
|
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
440/580/730 mA @ 120V, 190/250/310 mA @ 277V |
| Dimmable | Yes |
|
Dimming Type
Dimming Type
0-10V Dimming: This type of dimming control is the most popular and newest style for compatible dimmable power supplies. It works by varying the voltage from 0 to 10 VDC. A 10-volt signal on the dimming wire will allow maximum current flow to the LEDs for maximum intensity. A 0.6-volt signal on the dimming wires allows 6% of the current to flow from the power supply, dimming the LEDs to approximately 6% of full intensity. 1-10V Dimming: This type of dimming control is an older style that is being replaced with 0-10V dimming control. It works by varying the voltage from 1-10 VDC. A 10-volt signal on the dimming wire will allow maximum current flow to the LEDs for maximum intensity. A 1-volt signal on the dimming wire allows 10% of the current to flow from the power supply, which generates approximately 10% of the maximum intensity for the LEDs. TRIAC Dimming: TRIAC dimmers are typical household dimmers sold in hardware stores by brands like Lutron and Leviton. They rely on a semiconductor device called a TRIAC (Triode for Alternating Current). Adjusting the dimmer switch alters the timing at which the TRIAC conducts electricity in each AC cycle, modulating the energy delivered to the light bulb and resulting in adjustable brightness levels. Pulse-Width Modulation Dimming: This type of dimming control adjusts the output current based on the duty cycle. As the duty cycle increases, the current will increase, and the LEDs will be brighter. Conversely, if the duty cycle decreases, the current will decrease, and the LEDs will be dimmer. Resistive Dimming: Resistive dimming can be fixed or variable. If a fixed dimming level is required, a simple resistor is needed to dim the LEDs to a particular level. A potentiometer can serve this purpose if a varying dimmable level is desired. By changing the resistance value of the potentiometer, the output current of the power supply changes, and the LED intensity changes. Controlling a single power supply will require a 100K ohm potentiometer for 100% intensity (100K ohm) to approximately 10% intensity (10K ohm) based on the wiper position. |
0-10V |
| Efficacy | 145 lm/W |
|
Environmental Rating
Environmental Rating
 |
Suitable for Wet Locations |
| Equivalency | 250 Watt Metal-Halide |
| Finish | Bronze |
|
IP Rating
IP Rating
 |
IP65 |
| LED Color | Warm White, Natural White, Cool White, Selectable CCT |
| Rated Life (L70) | 50000 Hours |
| Lens Type | Glass |
| Lumens | 6960 Lumens, 9280 Lumens, 11600 Lumens |
| Mount Type | Junction Box, Surface Mount |
| Operating Voltage | 100-277 VAC |
|
Photocell
Photocell
What is a Photocell and How Does It Work?When an LED light is equipped with a photocell, the light will turn on and off automatically based on the available ambient light. Their unique functionality makes them ideal for outdoor area lighting specifically.Photocells are variable resistors that change the resistance in an electrical circuit depending on the amount of light present where they are mounted. Because of this, they must be mounted in exposed areas where they receive adequate light to function. Photocells, or photocontrols, come in a variety of shapes and sizes and can be integrated into a luminaire or be an added accessory depending on the light. Can a Photocell Be Bypassed?Some lights allow for a photocell to be bypassed as needed. When the photocell is bypassed, it allows for the luminaire to remain on constantly or be controlled by an existing switch or timer. Depending on the type of photocell and how it is installed in the fixture, it may be bypassable using a shorting cap, a slide or DIP switch, or by unplugging the photocell. Consult the user’s manual of the light to confirm which option(s) may be applicable and how to implement them safely. Always use caution and turn off supply power before working on wiring of any type.Shorting CapPhotocells on many commercial applications like parking lot and area lighting applications are mounted externally with a twist-lock socket or adapter. Swapping this for a shorting cap simply closes the circuit on your LED light fixture, which keeps your light in an always-on state. This allows it to be controlled externally as well if a central photocell or switch system is being utilized.DIP Switch or Slide SwitchWhile DIP switches and standard slide switches function differently in most cases, when integrated into the photocontrol system of a light they perform the same function. Switches like these are common on canopy and dusk-to-dawn barn lights. These types of switches allow you to toggle the photocell sensor on or off to fit your needs without any rewiring or replacing parts.Disconnect the WiringSome photocell designs, such as those commonly found in wall packs, allow the operator to simply unplug the photocell to allow the light to work in an always-on state or be controlled by an external switch. |
Integrated Photocell (Bypassable) |
| Wattage | 48 Watts, 64 Watts, 80 Watts |
| Power Factor | ≥0.9 |
| Product Materials | Aluminum Housing, Glass Lens, Rubber Seal |
| Product Weight | 7.5 lb (3.4 kg) |
| Warranty | 5 Year |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Abusive and offensive language
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
Recently Viewed
Get a Quote for
Get 10%
off your order
And be the first to know about the new products, sales, and more.
By providing your phone number, you agree to receive marketing text messages about new
products,
sales, and more.
Consent is not a condition to purchase. Msg and data rates my apply.
Reply HELP for help and STOP to cancel. View our Terms
of
Service and Privacy Policy.
There was an error while subscribing your email address
Please try again later
This email address is already subscribed to our mailing list
Thank you for being a subscriber!
Thank you for signing up!
An email has been sent to
This email address previously signed up to receive emails.
Only first-time subscribers are eligible for % off their next order.
Loading...
Item Added
Part Number:
No accessories available for this product.
Loading...